Xmas rush has gone...time to list more parts!

Xmas has gone..the boxing day sales have gone..time to get back to clearing my shelves....I spent most of Boxing Day sorting out more parts, but without photographing or pricing..so that will happen today..will keep updating this blog with more items...and like I have found this wording above...some bits I thought I would never sell...and...have let them go!!

 these headlights...a custom column with a new So Cal wheel, some 33/34 bits, didn't even make the blog, as some friends came around and snapped up the parts..this is going to be about a 90% clearance of 50 years of collecting..only keeping what I need to go with my 1932 Ford tourer...

Hope Xmas was good to you, and keep looking at the blog...more parts will be on here later today.

 Here's a treasure I didn't want to part with..was saving this one for a future build...custom smaller diameter copy of a 40 Ford wheel, has the horn button, comes with both the ( I assume ) early Ford keyway attachment, as well as it has Chev/Holden HQ splines.....$500  ****SOLD*****

 This is a new three bolt So-Cal wheel, but I have spare, both adapters to suit fitment to either typical Ford spline, or GM/Holden spline..just choose one..wheel and adapter, $400

 New floor mount shifter that I purchased for the next project...however, if that goes ahead, it will be 4 speed, so no need to keep this kit...it's been out, and started to fit up, but never mounted or used...$400

 have a spare 1932 rear crossmember..original..$150, and a later Ford one, $100

 Pair of lap style new seat belts in black...$80 for both

 Mallory to suit a 351 Cleveland..just used condition..$100

 ended up with spare Hot Rodding Inter. in my book dealing...these issues are $10 each..think retail is at least double this..

 also have a few of the Aust Hot Rodder, incl. issue #1...once again, good value at $10 each.

 hmm...some unusual length spreader bars...hope the size and price shows up..if not, will check tomorrow..(one is 20 5/8" $50, the other is 21 3/4" $60 ) ....got a pair of thingies from early Ford Brakes, and from memory (because of the paint colour), that must have been a spare dipstick from my T700..

 want to build your own So-Cal style ladder bars..basic kit here has diff plates, front bush assemblies, rear clevises, and centre braces..gotta be worth $250, I think..

 and this kit, all the same parts,  also includes the front crossmember, so maybe $350 for this setup..."Just add bars and a bit of welding!" *****SOLD*****

Last for tonight is a runner, but smoky 305...pretty well complete engine, seems there is a top pulley missing..I also have a T350 transmission that I can put with it, once again, a rebuilder...so motor and gearbox, $1200.

 

I got distracted today with other home-chores, so will try for more items to be listed tomorrow, or over the weekend....Greg..0437 32 31 33 or greg@comstar.com.au

 

and below, note I have been finding way more parts that were meant to go on my coupe build-up, so they are now all included..price has gone up to $34,500 to compensate, but well worth the value..just refer back a few blogs to the updated info....

"Twas the day before Xmas"...and if you haven't bought yourself a gift yet...Maaate..

 On the left..a 2" holley carb spacer, $35..centre is that Stainless lockable battery box $50, and on the right is a T400 slip yoke and part of the tailshaft..$60

 SB Chev short water pump triple pulley set for Alt-Air-Pwr  $100

 old SAAS wheel $10

 short water pump pulley set for Chev..used, but chrome top n bottom  $60

 Have two hood prop kits.one looks used, has the long and the short arms, but is missing all the bolts $20, while the other is new in a sealed pack, $38

 new Jen-E front shackle set $95

 New Vintique mirror, says 34 coupe, but would adapt to just about anything..$40****SOLD****

 rear window surround from a 35/36 Ford...$40

 one only steer arm..was $45...now dropped to $35............*****SOLD*****

 Cant remember how much these alloy licence plate/spreader bar brackets sell for..maybe $60**SOLD**

 Autotechnica new wood rim steer wheel..$75

 The Rodders Journals are going fast...this is just a  random pic I took, will have to check what issue #s are left...but all $12 each...

And these Custom Rodders are still for sale...they are on Ebay at the moment, and I reduced the price to help them sell..full set..#1 to # 121!

Once again...I have so much more to clean out..I'm running out of room to stack the parts for photographing...just wanted to thin this out a bit before I take all, or most of it, to Toowoomba Swap meet this coming February...

Xmas around the corner..but I have some more to post...

In case I missed saying it...wish everyone a very Merry Xmas, and hope to see you around the area soon...and to all those who have asked about "Am I OK", yes..fine, it's just that I have so many parts, enough to start on many more cars, but I just have decided to go thru the shelves, and thin everything out..and best way to do it is get everything out and list it.....if my coupe sells, fine...I still have my 32 tourer project tucked away...but I do want to move some parts, so please keep checking these blog listings and phone me..0437323133, or email me at greg@comstar.com.au

My brother in law Col wants to downsize his fleet as well, as he just purchased an HR X2 recently, and a 2 door post 55 Chev..so the X2 is for sale , and he just told me to list the '69 Camaro Convertible...he's had this for well over 10 years now, but time to free up some space, and I think it's a bargain, as he just reduced the price ..first with $40,000 gets it........Contact Col during the day on 0407 161 971.

This might be too late..but I've thrown in another coffee morning tomorrow...yes..8 hours from when I'm typing this...it's because my friend Les Winter is in town for a few days, and would be nice to catch up for coffee before he returns to USA...7am tomorrow, 23rd December, at the regular spot Victoria Point Lakeside.

 Now, at this late hour, I don't have time to list everything I am selling off...but a few pics will help..

 I will get to sort out proper photos and prices of each item over the next few weeks, so keep checking back here..I have hundreds of items to dispose of...

 Prices later..brief description below for now....

hot rod hiboy headlite mounts ..$60 pair

 assorted sb chev rams horns..some need work, and start at $20 each..all the way up to the good desirable ones like the RH Curl back style at $150

 a sb saddle mount  ...and from memory, I have a few more versions of chev/hot rod mount kits..

 back air cleaner is Flathead..front one might be as well, will measure the neck size first.**both sold**

 there are a few bits from a 35/36 body I wrecked out..the remains of a cowl vent may be good for parts, there's also the firewall, a windshield frame, a rear window frame, and the seat structure that may be saveable..gotta dig it out of storage first

 I have quite a few steering colums, both Ford and Chev/Holden...will sort 'em soon..

 a $35 alloy emblem for your 32 model car.....

 ssome $30 FTF alloy badges for your hiboy car...

 seems I collect brake pedals...this is about 1/2 of them...  **The stock looking one is SOLD ****

 some gauges I bought and never used..came from another local 32 coupe owner....

 a 35/36 RHD pedal assembly

 still got a few pulley sets for Chevs..prices will vary..** some of these gone already**

 think I have another two of these Ford 9" LSD hemispheres..this one is 28 spline, I'm sure I also have a 31 spline hidden away somewhere..

 Single rails..poor mans Toploader..still work fine in street cars...I need to count them, and check them out..think I have four of these left in stock..

 Just sold the red column, but the other, and the crossmember will go up for grabs, once I figure out what model thay are off...any ideas?..(I think the crossmember is 34 Ford, and the column?..anyones guess)  ****Red Column SOLD ****

 have a bunch of used T350-T400 , and Powerglide trans dust covers..priced from $20 upwards..

 Just a few asst. carb spacers/adapters...I have more somewhere...

stainless battery box..got a couple of T400 slip yokes...and it just keeps mounting up....
Will list it all properly in between Xmas festivities, grandkids, holidays, and my 2019 events that start Jan 6...hope to see some of you tomorrow for coffee..I'm off to bed!!