downunderdeuce: May as well continue my blog..with my parts for sale..

I don't want to sell this old tub,but reality says to me, I probably won't get around to building it..so up on the For Sale block it goes...As seen below, it was just a bare bones body and fenders on a chassis when I got it, but since then, I have been collecting parts for the way I wanted to build it, so ensuing photos will sort of show all the pieces that go with it...for the $22,000 asking price..

Body is sort of good, I intended just repairing and patching rust issues, but leaving it attached to the frame, and building around it...but you may not..

It comes with a Chassi Engineering dropped axle, a pair of used Ford stubs from another car, but they have the disc adaption and hubs included, a pair of front radius rods for splitting, I have the perch pins and a spring to suit, has a 283 that shows great compression, but I haven't started the engine, just bought it as a long and added parts to it, there is a runner Powerglide transmission, there is a narrow ( inch housing , axles, brakes, and a rough but rebuildable LSD centre, a set of 36 Ford radius rods, a reverse eye 32 rear spring, a Pete n Jakes mounting kit, a used original V8 radiator, a new dales grille insert, an incomplete set of gennie 32 headlights, a dropped headlight bar, a set of running board covers, front splash apron, rear horn covers, an F100 steering column, a gennie K member, a variety of useable body sections to help with rust repairs, a set of hood bows, rough opair of bumpers with bumper irons, new rear chrome shocks, spare rear x member, old windscreen and new posts, spare fuel tank, used front shocks and shock mounts, a battery tray and below seat floor section, and just a small box of new and used Vintique and other brand parts that will assist the build.

283-k member-apron-bumper brackets-grille insert etc.

repair pieces-radius rods-9 inch-cross spring-mount pieces.

brakes-F100 column-old LSD centre-new shocks-spare main leaf.

battery tray-calipers off old project

drop axle-front shocks and brackets-headlight parts and dropped bar.

I have this rough but useable 32 roadster cowl available for $300..maybe use it for wall art!

Have this new Deuce Customs 32 firewall for $300

anyone need a VB Commodore diff?...$150.

new 454 Chev carter fuel pump, $35.

Alternator pulley, one steel, one alloy, both are $10 each.

says it all..Ford XA axle for $150

35/36 bumper bracket, rear one, from memory...bit rough, so first $5 gets it!...got to have a bargain somewhere to make up for my other prices..haha.

set of four handles, no idea what they fit...$20 the lot.

Panhard bracket, $10

So-Cal style bullnose, but not sure of brand, there is not a badge, so $75 as is

repro cigar lighter piece for a 32 Ford, lets say $20

Pair of coil over shocks I ended up with, these are long style, so may not suit Model A-32s etc, but $300 the pair

one of the column swivel gizmos..$40

the two corner pieces that go in a 32 Ford closed car windscreen, $10 the pair

a new KIWI CONNECTION 32 Ford chassis, in primer, was $4000, now $3500

think this is a 32 Ford door stop..not sure..$5

two other door bits out of ???...$10 the pair

four assorted dovetail pieces...$20 the lot

said 32 Ford when I bought them, but not sure, was $40, halve that now, $20 the pair

pair of SB Chev rams horns, lh side has the alternator mount built in, $100 a pair.

Lokar shifter handle extension...now half price, $20 gets it.

down-on-it's luck Chev oil pan, has had the rear ripped out and attempted to reweld...wall art maybe..$40 will get it.

taillight gaskets for a 48 Ford, $5 the pair

old Radio Flyer style wagon..use at a swap meet, or wall art like I did..$70 gets it..

and another, slightly different design, but still $70..

set of rear Model A four bars, not mine, but they are here...$150 the set..

unusual early 260/289 Windsor engine mounts that have a stub facing down, $40 the pair.

here's the dimensions on those 4 bars.

old Drive in Speakers, the two painted ones are $80 the pair, the single unpainted is $35, or $100 gets them all.

pair of short, used, carrera front shocks, no springs, have heim style ends, $150 the pair

old factory 454 Chev intake manifold..bargain price of $1...but you gotta come get it!

old Holden six flywheel, left over from a project 20 years ago!..$10 gets it.

pair of early Ford grease shields..$5 the pair.

a pair of used 32 Ford style door handles, $40 the pair

those little mounts for under headlights, have two sets, each pair will cost you $10

used set of closed car hinges for a windshield, think these are 35 Ford..$30 the pair

original style 32 Ford hood sides, pretty good shape really for their age..not sure if they are original or repro, but doesn't matter, $350 for the two of them!**************SOLD************

sort of rare 15" hot wire wheels, 7" wide, and fit Chev/HQ Holden, $100 the pair

Hmm...there's the repaired oil pan...

set of 32 ford rear frame horns, $100 the pair.

are you a collector?..like wall art?, well here is all of the 50 USA states licence plated, $500 gets you the full set , makes an awesome display..I had three sets, one set already gone..

not sure why, but this long water pump Chev alternator bracket has had it's rear tab moved and rewelded...if you can use it, it'll cost you $5.

now this is the regular style, with the lower support bracket..$20 the pair.

various door gaskets as picured here and below...each pair are $5

$5 a pair

32 roadster windshield post rubbers, $10 a pair

Got a box full of these stock GM points distributors, as is are $35

here's a panhard bar of unknown brand, two pices you see, $100

This more complete set is $150

etc $150

etc.

pair of the widshield pull gizmos, $5 the pair*************SOLD*************

new, but over 40 years old, the steer bracket for early Ford spindles..$40

a So Cal ladder bar kit, all the pices, just need the bars and weld it all together..these bits, $150 the lot.

got a few Grant style steering wheel adapters, some are Ford, some are GM...$35 each, but the rarer keyway style on the right is $50

I have a complete 305 Chev that was taken out of a US import vehicle a few years ago..haven't tried starting it yet, but told it fumed a bit, so as is, $850

got a rear panhard kit for a 9" Ford, was $200, now $150 buys it..

new pair of 32 roadster door pieces, $30 the pair

couple of those screw things for a roof, , $10 the pair

a 32 Ford dickie seat hinge kit, just as I got it..was $100, will now take $80 the lot

I have quite a few single rail Ford gearboxes at the moment...I have had the covers off them all, and all look great inside...but I have never used any of them, just purchased as is..

this one, with the Dellow Chev bellhousing, also comes with a second spare gearbox, and a used Chev flywheel, and is $1000 for the lot.

it can come with either a large 168 tooth flywheel, or the smaller 153 teeth flywheel

there is also a Cortina single rail, has the shifter closer to the front, this has, if you want it, the six cylinder bellhousing and a clutch, but all of this will set you back $350

another one that looks great, came from a V8, so has the Cleveland/Windsor bellhousing as well, this one is $400

more pics of those panhards..

incomplete deck lid lock, with gasket, and striker, all this for $30

the gizmo that holds up the deck lid...this is $30

XE Falcon column with smaller sports wheel, this lot is $50

pair of welded style alloy valve covers to suit most small block Chev engines...has the breathers as well, got some scratches, so let them go for 440 a pair