LA Roadster Show - 2015

LA Roadsters Show & Swap (2015)

8000hp Dragboats in San Angelo,Texas "Raw Sound"

Red Green ~ Toilet Power.flv

VHRA Pendine Sands Hot Rod Races 4th & 5th July 2015

Coffee in July...and a few more bits i've found...

 Perfect July weather for coffee...a bit brisk early...but then it warmed up...think the count today was 43, but always nice to see another new car this time..

 I was so bust talking...I missed taking pics until some started leaving...

 As usual...there is nothing better than just talkin' cars....

 Another new car to the run...looking good...

 Dave wanted me to run his add....he's desperate for some Merc sheetmetal..

 Mens shed...nah...I don't need to make wooden table legs....I'd rather just talk hot rods

 So, next coffee run isn't until August 16....a big gap, but that's because of events I don't want to clash with....and there are way more than what I have here.....but...
July 10/11/12 Brunswick rod run,
July 19, All Ford day @ Willowbank, and All America Day and Swap @ Rocklea, July25 Nambour swap,
Aug 1/2 Greasefest,
Aug 8 Goin' Country rod run,
Aug 9 All Makes swap @Rocklea, and Nostalgia Drags, ..then my coffee morning....(think all those dates /events are correct)

 More bits for sale...Factory Chev V8 windage tray..as is, $20, but if I find the bolts for it as well, $50

 My 2nd last pair of 36 Ford radius rods...much nicer than the last two sets....still wondering if I should get rid of this set,.....but $400 my way, and they are gone!!

 Now, this is just wall art I guess, as they "IMPERIAL" covers are hard to find...  only have the one ...so, Chrysler Hemi valve cover..$90...

 Model A Ford dash rail....I have seen these on ebay from 50 upwards...mine is $40.***SELLING>>HAS BIDS ON E BAY***

 I have three spare 32 Ford closed car windscreen frames..this one has the top pivot mounting brackets, but not the ones in the upright (that help hold the screen open)..chromed..bit of rust starting..ideal for a beater...as is..$150

 This one, basically the same, except it has the two side brackets still attached, so $200

 Old used Torana steering uni joints that has been on the shelf for years...I have two of them...this green one is $30 as is, the other has a bit of shaft and the rag joint, so $40.

I have about 6 of these factory stock Chev points distributors, some complete, some like this, some incomplete for parts...but this one shown, as is, no cap, $35....need to contact me..   greg@comstar.com.au , or 04 37 32 31 33.

few more non essential bits I found out today..

 I was thinking of selling off these as a set of four, rears are new, fronts are used...but I might just hold onto the 165s and fit them on some set-up wheels...

 So that would leave these new 29" x 8" wide tyres for sale....think I have already put these up..I had better check..anyway..they are $220 pair..

 sometimes I wish the man-cave still looked like this...but the walls and floor are slowly all going...I remember making the mistake of counting the value of all the parts on the wall once, while Anita was standing with me......and I had to agree with here...there were parts that I was never going to use in my lifetime..

 Have to check this..but I think it was a trans shield for a T350..or was it a 'glide...or T400  haha..I'll figure it out..anyway..$50

 above n below is an old Accel Dual Point, of unknown origins, suits SB Chev, needs a cap for sure...at least it's a rare vacuum advance model....gimee $40

 these two mounts should be the front mounts for a 55/56/57 Chev V8..$40 pair.

 Now..here's a pair of rare mounts these days..genuine Chev to HQ Holden engine mount spacers...could be just what you need to keep a restoration correct..$150 pair.***SOLD>>ON EBAY NOW***

Like the sign says..I paid $5 US for this, so don't want much more for it...I have someone looking at it this Sunday, so hold off until then..

I have quite a few stock points style Chev distributors to list yet, also have about 20 sets of asst Chev pulleys, mainly for early short pump, but have long pump as well.

My bro in law has a bunch of 454 parts he is going to part with, think there are two short motors, and one long...will get the pics done and up here soon..