Test..test..I think the blog is fixed again!!

This was the test photo...seems the blog works again, relatively simple to use, and in my case, that's important!!

I have made the small panel below the alloy parcel tray, that holds the two spare gauges, and this will also be wired with the indicator lights, and maybe  ign. light, hi beam etc. The fuse box is hinged behind the column drop, so I can access it when needed, but hidden normally.


From the other side, with the panel shut, just a simple clip holds it in place'

This panel bolts to the column support, and will hold the ignition and headlight switches, as well as a couple of other switches...all these mount on the horizontal plate just seen in the photo...maybe a couple of really small diode lights will face forward ..... so almost all switches will be hidden from view.

Windscreen is done, and all the wiring is waiting to go in next week, probably. Below is the shot of the seat frame, i hinged the back so it can fold to get access to the battery, and the base is fairly deep, so the driving position should be reasonably low!