A collection of used USA licence plates, currently advertised elsewhere for $550 including delivery, willing to take an offer somewhere close to this.......Greg 04 37 32 31 33
collection of Chev rams horns, from $10 and upwards, depending on condition and style.
Ford single Rail four speeds, bought all four of them as is, never have taken the top off any to look inside..will check them and advise pricing later..
1932 cowl section in fibreglass, good for a bit of wall art, or steel it out and use it.now $300 takes it.
new Deuce Customs 1932 fibreglass firewall..use on a car, or cool wall art...$300
454 Chev new carter fuel pump..$35
Boxes of Australian Street rodding..most $20 a box..works out at about .50c a copy.
couple of old carts used to haul parts at swap meets...$70 for rh one, $95 for lh
New Bob Drake small 1932 style headlights, $400 the pair
pair of unusual style 289 Windsor engine mounts..new..$30 the pair.
a 305 Chev straight out of a US import, was told it was a bit fumey, but a great base for a Chev powered project, as all 305s have the hardened exhaust seats for unleaded..has starter-flexplate-pulleys-HEI electronic distributor, just missing alternator from memory (the one in the pic has been used on something else).......$950
Chev 396-427-454 intake manifold...$10, or make an offer!!
here's that 305 again..
better pics of those new Bob Drake headlights..
Have a complete spare set of the old Custom Rodder magazines..$200 the lot.
a rolling frame that came out of an aussie 35/36 truck..only parts are what is in the picture..no motor..good start for a truck resto, this is the short 131" wheelbase...$900
got stacks of CRUZIN magazines, most from .50c each..rarer ones a bit dearer
likewise, same sort of quantity and pricing with ASRs...from .50c upwards..
and likewise with US Street Rodders..plenty from the 1970s upwards..
complete rear axle assembly from an early Commodore I wrecked out, the rear as pictured is $150, I also have the runner 202 and Trimatic available for $500
I bought this truck some time back, not sure of the year, but believe it to be a 1932 model..has the shorter 131 style wheelbase, still has the desireable 32 or later banger motor..just has the rough cowl, hood grille as pictured, no other bodywork.....$2500
still have my brand new KIWI Connection deuce frame for sale, it's $4000 as pictured, or $6000 with a narrow 9" housing and axles, a pair of coilover rear shocks, a dropped I beam axle and spring,and parts to make up a rear ladder bar kit.
I have this other early Ford truck chassis, it's spring in front of axle, so somewhere around 1935 to 1940 I assume...this is the big one, a59" wheelbase, but guess it's desireable for the beam axle and radius rods, steering box, and other parts that could be used....chassis has a crack, rear end is locked up, so priced accordingly at $500
New, but trial fitted, hence the rhs piece offset on the selector..the person who had this was fitting up a Ford AOD auto, but went back to a C4, so this is new, but been sort of fitted...so $350 buys it.
more details needed?..contact Greg on 0437323133, or greg@comstar.com.au
No comments:
Post a Comment