My busy Fathers Day...and Wallys parts for sale

 So..my day started out early...coffee morning #55 had perfect Queensland Spring weather, and even being Dads day, there was still a strong turnout of people..and the cars, of course..

 and...had both my boys there, and they had their boys....reckon there will be lots of car projects in the Thomsen households for years to come...

 First time I have seen this A....very nice..it has done a couple of shows now...hope to see it on the street from now on!

yep..I was doing my flatty research, seeing as I have 4 of them now..

Now...some more sales to help out the Rudken family..

 Wallys little Hyundai has to go, none of us know a lot about it...but it's a 2005 model, has done just over 150,000 km., it's a manual, and the cars guides have this model at around $3500 to $6000, as we have noted on the internet..we're not sure, so let me know if any interest...thinking $4000.....

 small dented area above the rear wheel...has a towbar...not much else I can say..

Like this, and the following adds, just let me know by either e mailing at greg@comstar.com.au , or phone me on 0437 32 31 33.  all money going straight to Barbara, so help where you can.

So my afternoon has been spent sorting out a few of the tools and parts...been a busy day!!

 CIG arc welder...I plugged it in, and ran a weld..seems fine..has longish leads..I was thinking $100, but you tell me, or make an offer..

 Hard to find oxy welding kit, with, I think, nothing missing from the box..once again, with all these tools, open to reasonable offers, but this, we're thinking $80

 a pair of car ramps, pressed steel, have to be worth $30 the pair..

  these are the V8 Commodore axles, that are 28 spline..approx 28" long, and 32" long.. good used bare axles..got to be worth $40 each..

 Trade Tools router..I've seen used routers from $50 to $150 on the net, so let's say $60.

 Trade Tools nibbler..has new price of $168 on the box from memory..so about 1/2 price..$85.

 I plugged in the charger..put each battery on for 5 minutes...both work..but it's old..say $20...***.Not for sale..decided to leave this with Barbara in case she needs a drill..

 sander plugged in..it works, so $30

 ICON..who names these tools..anyway, the jigsaw works, so $20

 Makita planer new is $249..so let's say $80..SOLD..

 detail sander?..looks like an iron...anyway, it works..will take $25

 all Metric drills, little set on the left,$10...middle set, in the box,$40, and the masonry set,$20

 Thread dept. ...set on the left, $20...middle, taps, $10....and on the right,$10..SOLD

 Makita hammer drill, I have no idea..lets try for $80..(like any of this, grab it if it's a bargain, or make me an offer if I have overpriced anything...just remember where the money is going)

 quality item here by the looks, famous brands sell in the mid $100s..our thoughts..$45!

 a wood cuttin' thingy...has to be worth $60.....

 same sort of thing, but slides as well...new price was $175...our figure is $120

 this has to be good value..overflow tank with the brackets..$60..<<SOLD>>

 chev fuel blockoff, $10.>>>.RPC pedal $50,>>> 2 sets of red anodize hose thingies, $10 pr, >>>some sorta weird clutch drive thing, $10.>>>..rare Spares gizmos, $10.>>>..windwing brackets, $80.>>>.water pump...free!

 Sidchrome two piece tool box..a bit small, and the trays are a bit thin and flexi--but still would have been a bit of money to buy new..rolls around fine..is it worth $100 to you??

 the 3 plates OK, TX, TX, are worth $10 the lot...., but we found an invoice where Wal paid for the LA Roadsters plate, and it was $$$..currently one on us ebay at $30 US, so that's $40 aust. without post...50th Anniversary...a good piece of memorbillia ..$40 is the money!  >>SOLD>>

 a box full of thingies...I think these are for woodworking...anyway..$30

 pair of round jack stands..$30 the pair..<<SOLD>>

 pair of square Stanfred jack stands, $30 a pair.<<<SOLD>>

 pair of SCA stands, $30 the pair<<<SOLD>>>

 I'd sell this brass windshield frame..but...need to know what it is first..any ideas?

and last, at the moment..a Scorpion roof rack, it might be a Suzuki, but not 100% sure..guess you could just mount it on your box trailer to take more parts to the next swap...open to offers..try $100.



Going to collect more tools and whatever else is at wals home later this week, so once sorted, will do another list of goods for your perusal..and a big thanks to all those who have helped so far...over 50% of what we first put up for sale has been taken and paid, with more going this week..great response!!